Error in the values of support reactions in print preview report.
Dear all, I'm using Stadd Pro V8i SS6 and new to the use of this software.After analysis I move to the report setup and then from there selecting the output I select the reactions for...
View ArticleClik here to view.
FORCE FOR COLUMN DESIGN
Dear All,Kindly go through attached staad model. For design of column member number 229 staad givesPu = 2937.94Mz = 284.05My = 13.5In post processor My value of 13.5 is not appearing.Please help to...
View ArticleHow do I check for Staad V8i updates and where do I download any patches?
How do I check for Staad V8i updates and where do I download any patches?
View ArticleClik here to view.
Unique Condition at EOS Modeling Advice
I was wondering if I could get some advice on modeling this particular situation in the attached image.The slab extends to the edge of the wall when it is over a wall, but between walls the EOS stops...
View ArticleEquivalent steel section for joist girders
I am not able to analyse structure with joist girders with ASCE properties assigned in STAAD. When I searched it is told that you cant carry out analysis with those properties assigned for joist, you...
View ArticleSTAAD Foundation Advanced: Machine Foundation Wizard
Hello.I am a Grad student and I need to design a foundation for a centrifugal and reciprocating machine. I have generated a model for each using the machine wizard of STAAD Foundation Advanced. When I...
View ArticleClik here to view.
Offset vs. Rigid type of Master/Slave
Dear All,Reference to this topic http://communities.bentley.com/products/structural/structural_analysis___design/f/5932/t/43424. It’s mentioned that in order to achieve the analysis model for the below...
View ArticleError in analyze...Load cases
Hello siri have a problem in analyzing my 5 floors building...i have errors every time i make analyzing any one can help me??Error: **WARNING - UNEXPECTED COMMAND IN LOAD DATACHECK SPELLING AND ORDER...
View ArticleUser table property
Hi,I have imported some sections from the section wizard to use in an analysis model, created user provided tables for them and assigned the section types to members.However, I get errors saying that...
View ArticleRam concept modal mass in Vibration analysis
hi,i would like to work out the modal mass from the Vibration analysis in Ram Concept.how is it possible to see this result in Ram Concept?I saw the Frequencies for each mode shapes but i am not be...
View ArticleCan anyone provide design file of structure(staad input) with load...
code:1893 PART -2 2014 states "while design staging for elevated reservior we need to analyse the structure considering P-delta effect.But in staad help it quotes " p - delta effect is considered for...
View ArticleClik here to view.
Shear wall design
Good Day fellow colleagues,I have tested two models to complete a shear wall design using staad pro. In one model I included only the shear walls, beams and columns and in the other model I included...
View ArticleRAM Concept - Added Tendons
I've just started using RAM Concept and am having issues where I have 'added tendons'. I am continually receiving "WARNING: A generated tendon at (()()) was trimmed which resulted in a % loss of...
View ArticleMMAG used in Staad Pro V8i SS6
Hello,Can anyone tell me how to add Moment Reduction Factor for Additional Moment calculated due to Slenderness effect (as per IS-456:2000 clause no. 39.7.1.1)Because when i am using MMAG command then...
View Articlep - delta
Sir i have done design of G+1 building .Seismic Static analysis was done by joint weight method,please add p -delta effect on the structure ,actually i want to the know the sequence in which p-delta is...
View ArticleSection Builder Export to STAAD Pro - "Invalid Name"
I have created a built-up plate section in Section Builder and when i go to export it to STAAD Pro I get all the way to the properties dialog box to where I have to give it a name and click OK.....when...
View ArticleClik here to view.
Signed Response Spectrum
When I am using the 'Signed Response Spectrum' command, next to the "Mode No." there is a check box with option "Signed". Can someone please explain the use of this checkbox ie when to use it and how...
View Articledifferent section properties for same section
Hi all,In STAAD output result file, STAAD shows different values of section properties (ZEY) for the same section.I have attached pdf file highlighting the values.I am using SS6 version of STAAD .I...
View ArticleDifference in results of analysis in staad and solidworks.
I have to model a 6x3M weighbridge structure using plates and U beams. U beam is made using 'create user table' option. The structure is supported in all four corners with fixed support and load is...
View ArticleBuilt-up members parameters
Hi everyone!In my STAAD.Pro V8i (series 4) versión 20.07.09.31 I find that design parameters (according AISC 05) for built-up members STP, SNUG and CSP do not work at all. Neither the slenderness nor...
View Article