How to assign a live load on a structure consist of several plates?
Hello,I am designing a metallic folding staircase on which i have to assign a live load of 500 pounds person how do i assign? the folding staircase is connected cantilever to a platform at certain...
View ArticleRAMSampleModel.rvt
I am looking for the above file in the subject line for the Ram to Revit link tutorial. Thus far, all links I have come across have been dead ends.
View ArticleClik here to view.
RAM model export to Tekla
Hello, I have a RAM steel model and want to export to Tekla, I tried using create ISM, but when I use Tekla to import ISM file, I got this error message.Does anyone know how to resolve the problem? Or...
View ArticleClik here to view.
Retaining wall in STAAD PRo
Kindly us how to model retaining wall and analyse- design it ( trapezoidal shaped) having following four parts - trapezoidal shaped wall, toe, tail, keyhow to model it, as it is having solid plate...
View ArticleMAT FOUNDATION - STAAD PRO - DISPLACEMENT RESULTS (Contours)
analysis is complete for mat foundation still no displacement is shown. what could be the reason sir"
View ArticleClik here to view.
RAM Concept _Error
HiI am getting this error (please refer to the image below) while opening RAM Concept. Is there any way to remove this. I am using 6.0.1 Connect EditionThanksChirag
View ArticleLimcon Bolt Strength
In Limcon Bolt Strength calculation in connections seems giving higher than usual AISC 360-05 procedure. In AISC formulation is 0.75*Fn*Ab. But if you apply same in Limcon results are not consistent....
View Articleplate mesh Query in staad modelling
hello,I am designing a slab for shedding for a' machine' of steel plate supported by 4 columns on which a load is applied the loading is a solid cylinder, to apply the load it has to be generate the...
View ArticleP-Delta , Response Spectrum & Diaphragm in STAAD-Pro
Hello All, I have faced a little problem and confusion about these things (P-Delta , Response Spectrum & Diaphragm) in STAAD Pro. , I was using ETABS in the mentioned above issues and I know how it...
View ArticleSteel Design Parameter
The following steel design parameters seem to be not recognized in the latest version STAAD. Pro V8i , they use to work great in the previous versions:LY, LZ, UNT,UNB,UNL.These command are not giving...
View ArticleRAM Elements Concrete Wall Design Module - ACI 318 update
I have RAM Elements 13.4.0.177, which I believe is the latest version. The concrete wall modules, both the concrete wall design and the tilt-up wall design, are still referencing ACI 318-05. Is there...
View ArticleSTAAD Pro design ERRORS
Hi Im working in a building design and when I try to run the analysis 8 errors, 3 warnings appearsHow can I remove them?STAAD SPACESTART JOB INFORMATIONENGINEER DATE 28-Mar-16END JOB INFORMATIONINPUT...
View ArticleStopLogs
Hi,Good day . our client is requesting for a software that can help them on their projects which is basically Stoplogs. they want a software that can design and analyze the structure. can you please...
View ArticleApplying load at CG(Centre of Gravity)of a body.
I am having a problem in applying Load(Concentrated load) at the CG of the body in my STAAD model. CG location is done but the problem is applying that since the body is a hollow vertical tube section....
View ArticleCant get mode shape properly
I am creating a lumped mass model in staad.my cut off mode shape is 9.but when i perform analysis it only gives me 2 mode shape results.sir plz help me out and tell me how to get other mode shape...
View ArticleTypical beam design using AISC_US units
I have a few simple questions regarding beam design:My structural model description is the following:I have a simple monorail that is suspended from the perpendicular floor beams above. The connections...
View ArticleStaad pro getting hanged when putting wrong value
Hi all I m new in this form, as I am facing some issues like when we putting some wrong value in staad Its gives error and then gets hanged.finally I need to endtask the software which lost my work....
View ArticleRAM Elements Repetitive Base Plate Assignment
I have 1200ft of pipe racks, with the same anchor and base plate design. Can a template be created to apply a single bp design to 122 nodes?
View ArticleViewing spreadsheet
Hello. I have opened up my RAM Elements program this morning and cannot see my spreadsheet. Yes, I'm aware there is a way to view or not view that panel as toggled on the "Home" Tab (similar to the...
View Article