Clik here to view.
RAM steel column
Hello guys,I run into a situation where a different level (LV.3) needs to be created, so I make a copy from an existing level (LV.2) and modify the floor-to-floor height. After running column design on...
View ArticleClik here to view.
Ram frame - Sds (for Ev) in Load combination Generation
In Ram frame, the Sds (for Ev) value is not automatically generated and not shown in loads and applied forces report. Can you please let me know the reason.Also, is it possible to model secondary beams...
View ArticleClik here to view.
STAAD RUN IN VERSION 20.07.11.90 AND 20.07.11.33, GIVE DIFFERENT RESULTS !
Dear Bentley,I run the same file in two different Staad versions i.e. 20.07.11.90 and 20.07.11.33. To my big surprise, the output and results were totally different. There was a stark contrast in the...
View ArticlePlate members assigned to more than 10 groups
I currently have a complex model in which I have used groups in order to better organise members and plates elements. The problem I now have is that I have plate elements which exist in more than 10...
View ArticleNeed support reaction only-Staad pro.
Hi,I am trying to find load on each pile in a pile group by modeling pile cap with plate elements(did not do meshing) and a pier on it with beam member. Provided support type hinge at each pile...
View ArticleClik here to view.
Pipelink File STAAD.Pro Advanced CONNECT Edition - Version 21.00.01.12
Hi,I have been trying to export and import files to STAAD.Pro Advanced CONNECT Edition - Version 21.00.01.12 using pipelink.The files that STAAD tries to import and export are .pipelink.db files and...
View ArticleRam manger application has stopped working while creating ISM
hello there, Im trying to create ISM file for my RAM model to i can use it in Revit but every time im trying to do that the RAM manger crashed, i dont know why. so please if anyone can help me Ill be...
View ArticleLoad on piles - staad pro
Hi,Is it possible to calculate load on piles as calculated manually(please see attached file) in staad pro?Thank you(Please visit the site to view this file)
View ArticleSTAAD Foundation : Multiple columns in one footing
Is it possible to design a footing carrying 3 columns in STAAD Foundation?It can't be counted as combined since the 3rd column isn't collinear with the other two.Is it considered as a mat foundation?I...
View ArticleStaad Editor from Connect Edition to SS6 (downgrade)
Dear Support Bentley,I currently do moedling in STAAD connect edition and when I do run there is error message about member distributed load is outside member limit, I try to downgrade my file through...
View ArticleStaad.Offshore
Is Staad.Offshore still available/supported? I have used it in the past for generating transportation loads for Staad.Pro but, other than questions in this forum, I can find very little information...
View ArticleClik here to view.
Ram Connection - Fin Plate
Hello all,can i make fin plate connection when i working with AISC code? or how to make this type of connection?
View ArticleRCDC basement wall and column plates
So I modeled some project and I was curious to get things done faster by trying RCDC rather than just relying on STAAD for analysis and designing manually (By the way, is there anyone else other than...
View ArticleLarge Displacements
I modeled a 25 storey building frame and analyzed it for standard dead loads and live load and wind loads. But the results are showing very large displacements node to node as well as in beams for...
View ArticleHow to add new steel Grade to Limcon library
In the manual it says that steel grade list can be updated by editing section library. I need to add Steel grade according to Russian GOST characteristics. Could you please describe step by step how to...
View Articlequery in the staad mode
Good Morning Bentley Support, I have a query in the staad model (TEXT CODE) attached in the email.STAAD PLANE START JOB INFORMATION ENGINEER DATE 24-Aug-17 END JOB INFORMATION INPUT WIDTH 79 UNIT...
View ArticleImport RAM Concept into RAM SS
Hello,Is it possible to import Ram Concept files into RAM SS? I would like to import the geometry of a floorplate and the supporting columns/wall locations.Kind regards,Katherine
View ArticlePartial Moment Release
In Staad Pro there is a option called partial moment release where we can redistribute the moment.. Can we do the same in Ram Structural System?
View ArticleClik here to view.
Missing dead load in lower level reactions (RAM SS)
Project info:We are modeling an 8 story building that will have concrete columns & core walls for vertical support at the first 2 levels. After the first 2 floors, the columns stop and CFS bearing...
View Article