Design methodology recommendation for using Ram Staad and Ram concept to...
Dear Concerned,I am in the process of designing a complicated structure irregular in shape and with considerable in plane forces due gravity and lateral loading.The structure is an inverted pyramid,In...
View ArticleRAM Connection BCF Direct Weld using Fillet Weld
I am using Ram Connection Stand Alone to Design the Welded Connection for a Truss W6x20 Diagonal to a W12x50 Chord.I am calling this a BCF and trying to use the Smart DW.The problem is it only gives me...
View ArticleRam Frame model runs but not Ram concrete.
I cannot find instability in Ram Concrete. I need help trouble shooting model.
View ArticleClik here to view.
Where is Node Displacement Curve?
In STAAD.Pro Connection Edition (21.00.00.57) after running a nonlinear analysis I can't find the node displacement curve. Where did you hide it?In case you're not sure what I'm talking about here it...
View ArticleEtabs Floor to RAM Concept
(Please visit the site to view this file)This software will transfer Etabs floor directly to RAM Concept. First to export etabs file to e2k format. Then use the exporter to export to GFCC format which...
View ArticleGravity Column Module - Second Order Analysis?
Hello All,I recently created a model of an existing building with gravity only members. The intent of the model is to simply be able to perform load takedowns from the gravity column module, therefore...
View ArticleClik here to view.
Parametric Models Meshing Type - Staad Pro CE
Hi,I would like to know, 1) Difference between wall and slab type meshing.2) When do we use wall and slab type?I could not see this in SS1 version. Please see attached screenshot below.Thank you
View ArticleRCC CHIMNEY
HOW TO MODEL AND ANALYZE RCC CHIMNEY IN STAAD PRO FOR WIND LOAD, SEISMIC LOAD AND TEMPERATURE EFFECT?PLS HELP
View ArticleModeling Shear Wall - Staad CE
Hi,Could you please tell me how do we model a shear wall in staad pro connect edition?I am unable to model it and unable to selected already modeled shear walls in building staad file.Thank you
View Articlein my modal some member(beam)in same series is not analyzing and designing...
i'm trying to design one my project in staad pro but entire modal some member(beam) are not designing at least those members are not listing in analysis result and not giving any errors,silently it is...
View ArticleSeismic load on chimney
I have modelled a RCC chimney in Staad pro and applied the wind load and dead load. How can I apply the seismic load.Please help
View ArticleWould it be viable to model Plates with out meshing instead of using floor load?
I have a complex beam arrangement in the floor with openings in that case it would take a lot of time to apply load as floor load since the co-ordinates will have to be defined. Instead of that would...
View ArticleHow can i change the decimal spaces in Staad ANL file?
The shear and moment forces provided in the ANL file show values with two decimal spaces instead of the desired 3 decimal spaces. Postprocessing tables show correct 3 decimal spaces. Im using the...
View ArticleHow can i get STAAD.PRO Japanese Version?
Looking for a way to change staad.pro to japanese language.
View Articletemperature load in rcc chimney
i want to apply temperature load for an RCC chimney in staad prothe inner temperature of the chimney is 120 degree Celsiusthe temperature between brick lining and concrete shell is 60 degree Celsiusthe...
View ArticleClik here to view.
Notional loads used in load cases creates empty joint loads
Hello,I have a large model in which I am attempting to model a few moving cranes in a building. I have gotten the Notional command to work and it applies the horizontal loads as I would expect (the sum...
View ArticleFree falling load
Hi guysI hope you can help, I would like know if StaadPro can handle a free falling load.I have a tank that needs to be dropped from some height on to concrete floor/slab and I wonder if there is a way...
View ArticleClik here to view.
RAM Elements : Tilt-up Wall Reaction
Needed to design a wall footing. However, RAM Elements does not have a module for it. How can I extract reaction from the wall either from within the model or within the tilt-up/concrete wall module?...
View ArticleClik here to view.
RAM Elements: Unlock the Parameters in Wall Module
I modeled a wall in 3D using RAM Elements. After processing, a tilt-up wall was assigned using the module. However, some parameters in the module are locked and some are missing like the out-of-plane...
View Article